Electric Vaporizers

MV&F
General Industrial and Explosion-proof Electric Vaporizers and Heaters for Cryogenic Liquids and Gases
MV&F offers a full range of electric heaters and vaporizers. Due to high quality components from Russian and foreign suppliers, the MV&F′s electric heaters and vaporizers demonstrate optimal efficiency, great ease of maintenance, operating safety, combined with long lifetime. They are able to satisfy different needs of our customers.
Our devices can be used in:
Gas industry
Cryogenics
Petrochemical industry
Electric power industry
Chemical industry
Production of industrial gases
Aircraft engineering
Shipbuilding
Pharmacy
Food industry
Our engineering team utilizes the latest in CAD systems to provide a timely response to each customer's needs. Our engineers maintain, and constantly strive to improve the design process, providing innovative solutions for design challenges.
Our company maintains quality throughout the manufacturing process starting with inspection of incoming materials from pre-approved suppliers to final inspections of finished products.
Final quality audits of product characteristics and in-process control procedures insure that all customer expectations have been met.

MV&F
Examples of Some Technical Solutions
Electric heater (vaporizer) with intermediate heat-transfer agent

Product overview:
  • 12 kW; 380 V; 50 Hz
  • Fluid ̶ LPG, LNG, and other liquid gases
  • Pressure – 40 MPa
  • Capacity – 50 Nm3/h
  • Frame – Stainless steel AISI 304
  • Intermediate heat-transfer agent – aluminum
  • Coil – Stainless steel AISI 316L
  • High working pressure (Max. allowable pressure depends on the coil type)

Electric steam vaporizer for carbon dioxide

Product overview:
  • 90 kW; 380 V; 50 Hz
  • Fluid ̶ liquid carbon dioxide
  • Pressure – 1 MPa
  • Capacity (CO2) – 1000 Nm3/h
  • Intermediate heat-transfer agent – aluminum block
  • With a steam heating circuit
  • Thermal insulation of the shell
  • Sensors for temperature measurements of the outlet fluid and the heating elements are included

Electric heater (vaporizer) with an intermediate heat-transfer agent

Product overview:
  • 2x1.5 kW; 380 V; 50 Hz
  • Fluid - gaseous nitrogen and oxygen
  • Pressure - 25 MPa
  • Capacity – 50 Nm3/h
  • Frame – stainless steel AISI 304
  • Coil – stainless steel AISI 316L
  • Two heaters are installed on one frame
  • Intermediate heat-transfer agent – aluminum
  • High working pressure (Max. allowable pressure depends on the coil type)
  • Sensors for temperature measurements of the outlet fluid and the heating elements are included

Electric flow heater

Product overview:
  • 40 kW, 380 V, 50 Hz
  • Fluid – nitrogen, hydrogen, natural, and other gases
  • Pressure – 2.5 MPa
  • Capacity – 3000 Nm3/h
  • Frame – stainless steel AISI 304
  • Coil – stainless steel AISI 316L
  • Two heaters are installed on one frame
  • Intermediate heat-transfer agent – aluminum
  • High working pressure (Max. allowable pressure depends on the coil type)
  • Sensors for temperature measurements of the outlet fluid and the heating elements are included

Electric flow heater

Product overview:
  • ·21 kW, 380 V, 50 Hz
  • Fluid – nitrogen, hydrogen, natural, and other gases
  • Pressure –2.5 MPa
  • Capacity – 600 Nm3/h
  • Frame – stainless steel AISI 304
  • Marking of explosion proof 1ExdIICT2 Gb X
  • Sensors for temperature measurements of the outlet fluid and the heating elements are included

Electric flow heater

Product overview:
  • 9 kW, 380V, 50Hz
  • Fluid – nitrogen, hydrogen, natural, and other gases
  • Pressure –2.5 MPa
  • Capacity - 150 Nm3/h
  • Frame – stainless steel AISI 304
  • Sensors for temperature measurements of the outlet fluid and the heating elements
  • Marking of explosion proof device − 1ExdIICT2 Gb X

Electric flow heater

Product overview:
  • 6kW, 380V, 50Hz
  • Fluid – gaseous helium 5.0
  • Pressure – 1.6 MPa
  • Capacity – 250Nм3/h
  • Frame – stainless steel AISI 304
  • Sensors for temperature measurements of the outlet fluid and the heating elements

Electric flow heater

Product overview:
  • 1.5 kW, 220V, 50Hz
  • Fluid – natural gas
  • Pressure 4 MPa
  • Capacity –23Nм3/h
  • Frame – stainless steel AISI 304
  • Sensors for temperature measurements of the outlet fluid and the heating elements
  • Marking of explosion proof – 1ExdIICT2 Gb X

Electric heater with an intermediate heat-transfer agent

Product overview:
  • 2х1.5kW, 380V, 50Hz
  • Fluid – gaseous oxygen and nitrogen
  • Pressure – 1.6 MPa
  • Capacity – 50 Nm3/h
  • Frame – stainless steel AISI 304
  • Coil – stainless steel AISI 316L
  • Two heaters are installed on one frame
  • Intermediate heat-transfer agent – aluminum
  • Sensors for temperature measurements of the outlet fluid and the heating elements

Electric heater with an intermediate heat-transfer agent

Product overview:
  • 4,5kW, 380V, 50Hz
  • Fluid – natural gas
  • Pressure – 1.6 MPa
  • Capacity – 50 Nm3/h
  • Frame – stainless steel AISI 304
  • Coil – stainless steel AISI 316L
  • Intermediate heat-transfer agent – aluminum
  • Sensors for temperature measurements of the outlet fluid and the heating elements
  • Marking of explosion proof – 1ExdIICT1 Gb X
  • Horizontal pipe orientation

Electric heater with an intermediate heat-transfer agent

Product overview:
  • 18kW, 380V, 50Hz
  • Fluid – natural gas
  • Pressure – 25 MPa
  • Capacity – 50 Nm3/h
  • Coil - Stainless steel AISI 316L
  • Intermediate heat-transfer agent– aluminum
  • Sensors for temperature measurements of the outlet fluid and the heating elements
  • Marking of explosion proof -1ExdIICT1 Gb X

Electric heater with an intermediate heat-transfer agent

Product overview:
  • 9kW, 380V, 50Hz
  • Fluid – gaseous oxygen
  • Pressure – 20 MPa
  • Capacity – 400 Nm3/h
  • Frame – stainless steel AISI 304
  • With a power control cabinet on the same frame
  • Coil – stainless steel AISI 316L
  • Intermediate heat-transfer agent– aluminum
  • High working pressure (Max. allowable pressure depends on the coil type)
  • Sensors for temperature measurements of the outlet gas and the heating elements
  • Thyristor heating power controller
  • The power control cabinet is equipped with a PID controller
  • Gas temperature controller оn the front side of the cabinet
Designed to heat air separation products (oxygen, nitrogen, and argon), carbon dioxide, and other industrial gases in the lines with high flow rates, the MV&F stationary heaters are available from 1 kW to 200 kW. They can provide heating temperature up to 400°С. Our standard devises should be plugged in the 380 V electric grid, they can operate at different values of allowable working pressure (1.6, 2.5, 4.0, 10, 15, 20, and 40 MPa), and have thermal insulating shells.
Explosion-proof enclosures and stepless adjustment of heating power are also available.
Compact low power electric heater

Our compact low power electric heater can be plugged in the general-purpose 220 V electric grid and connected to the system with the help of compression tube fittings (Ø - 6, 8,10,12,14,16, and 18 mm. Standard inch size fittings are also available). We offer low power heaters with different heating capabilities (75, 210, 420, 630, and 840 W) to compensate for the effects of gas composition and flow rate. Designed for heating air separation products (oxygen, nitrogen, and argon), carbon dioxide and other industrial gases, the low power heater can be installed after a cryogenic convertor or before a pressure controller to prevent its icing.
MV&F
Advantages of our heaters (vaporizers)
1
Our heaters are tailored exactly to customer needs.
2
Replacement of heating elements can be done without dismantling and disconnecting the heater (vaporizer) from the technological line.

3
It is possible to heat fluids higher than 800°C ( In such case the heater design and materials should be discussed with a customer).
There is only a brief review of our electric heaters, vaporizers, and control devices. We manufacture general industrial and explosion-proof equipment that can satisfy different needs of each customer. We guarantee that the equipment will demonstrate optimal efficiency, great ease of maintenance, operating safety, combined with long life.

All our products are certified according to Technical Regulations of Customs Union TR CU 012/2011.
Made on
Tilda